Panel Accent LED Lighting Kit
Panel Accent LED Lighting Kit
Everything you need to light your wall panels, four strip lengths, a 24V transformer, and a CCT remote. One box, one price, ready to install.
Couldn't load pickup availability
Panel Accent LED Lighting Kit
Light that lives inside your wall.
The 12mm gap between your acoustic panel slats isn't just a design detail — it's an opportunity. Our LED strips sit invisibly inside that gap, flush along the full height of the panel. What you see from across the room is a continuous line of warm, architectural light. Not the source. Just the glow.
The kit includes four strip lengths — 4ft, 6ft, 8ft, and 10ft — so you can light gaps across any panel configuration without cutting or joining. Use the CCT remote to select your color temperature, dim to your preferred level, and set a scene mode. One tap changes the entire room.
Engineered to disappear. Designed to impress.
-
Hidden in the gap, only the glow shows
The 12mm-wide silicone strip sits flush inside the gap between panel slats. No visible hardware, no exposed wiring on the wall face. The light appears to emanate from within the panel itself — a detail that reads as custom and intentional.
-
Four lengths in every kit
Every kit includes one 4ft, one 6ft, one 8ft, and one 10ft strip. Use whichever length matches your gap height — the remaining strips are ready for your next wall. No additional purchases needed for mixed-height installations.
-
6 tunable color temperatures
From 2700K candlelight warmth to 6500K crisp daylight — all six presets are on the included CCT remote. Switch between moods instantly without apps, hubs, or Wi-Fi. The full range covers every residential and commercial lighting scenario.
-
CCT remote with dimming and scene modes
The remote controls brightness up and down, sunrise and sunset scene transitions, a 60-second delay-off timer, and sequential cycling through all color temperatures. Full room control without leaving the couch.
-
Low-voltage DC 24V — safe and efficient
The included adapter converts standard US 110V wall power to DC 24V. Low-voltage LED systems run cooler, use less energy, and are safe to handle during installation. The adapter carries FCC, CE, and GS safety certifications.
-
Plug-and-play — no electrician needed
Slide the strip into the gap, connect to the LED controller via 3-pin clip connectors, plug the adapter into a standard US wall outlet, and power on. No soldering, no wire stripping, no hardwiring. Most installs take under 30 minutes.
-
FCC certified · CE marked · RoHS compliant
The full system — strips, controller, and adapter — carries FCC Part 15 Subpart B certification, CE marking, and RoHS compliance. Certified safe for residential and commercial indoor use.
-
12mm width — fits the panel gap precisely
Our acoustic panels have a 12mm gap between each slat. These strips are 12mm wide — sized to fit flush in the gap without modification to your panels. No trimming, no adhesive, no mounting hardware. Press in and plug in.
Six presets. One remote. No app needed.
All six color temperatures are switchable from the included CCT remote. The remote also controls brightness, sunrise and sunset scene modes, and a 60-second delay-off timer.
One box. Everything you need.
No separate transformer to buy, no remote sold apart. Every kit ships complete and ready to install.
- 1 × 4ft strip (12mm wide)
- 1 × 6ft strip (12mm wide)
- 1 × 8ft strip (12mm wide)
- 1 × 10ft strip (12mm wide)
- 6 color temp presets (2700K–6500K)
- Brightness up & down
- Sunrise & sunset scene modes
- 60-second delay-off timer
- AC 100–240V input (US plug)
- DC 24V 4A output
- LED controller with 3-pin connectors
- FCC, CE & GS certified
Designed for Modern Loom acoustic panels.
The 12mm strip width is sized precisely to fit the 12mm gap between slats on our acoustic wood veneer panels. One strip per gap. Our 10ft panels work perfectly with the 10ft strip — floor to ceiling, no cutting, no joining.
Specifications
Full kit specs
| Strip width | 12mm |
| Strip lengths included | 4ft, 6ft, 8ft, 10ft (one each) |
| Strips per kit | 4 |
| Color temperatures | 2700K, 3200K, 4000K, 5000K, 5500K, 6500K |
| Remote type | CCT wireless |
| Remote functions | Color temp, dim, scene modes, delay off |
| Operating voltage | DC 12–24V |
| Adapter input | AC 100–240V, 1.8A, 50–60Hz |
| Adapter output | DC 24V, 4A |
| Controller rating | DC 6–24V, max 3A / 7A |
| Certifications | FCC Part 15B, CE, RoHS, GS |
| Indoor use | Residential & commercial |
FAQ
What exactly comes in the kit?
What exactly comes in the kit?
One kit includes four LED light strips (one 4ft, one 6ft, one 8ft, and one 10ft — all 12mm wide), the CCT wireless remote controller, and the 24V 4A AC adapter with LED controller and all connecting cables. Everything is in one box. No additional purchases required.
Do all four strips light up at the same time?
Do all four strips light up at the same time?
Yes — by design. Our acoustic panels have a 12mm gap between each slat and these strips are exactly 12mm wide. The flexible silicone body sits flush in the gap without modification to the panels. No adhesive or mounting hardware needed.
Do I need an electrician to install these?
Do I need an electrician to install these?
No. The system runs on low-voltage DC 24V from the included adapter, which plugs into any standard US wall outlet. All connections are simple clip-on 3-pin connectors — no soldering, no hardwiring, no permit required. Most homeowners complete the full install in under 30 minutes.
Are these the warm white shown in your showroom photo?
Are these the warm white shown in your showroom photo?
The showroom display uses the 2700K warm white setting — the warmest option, which creates that rich golden glow against the wood grain. The same strips can dial up to 6500K cool daylight. All six color temperatures are switchable any time with the included remote.
Can I see these installed in person before buying?
Can I see these installed in person before buying?
Yes — the lights are installed and running in our Richmond showroom at 8203 FM 1464 Suite 1200, Richmond, TX. You can see all six color temperatures on the actual panels before buying. Pickup is available within 2 hours of ordering online.